This listing is for one brand new Moisture Separator for a scuba or paintball air compressor.  The Maximum working pressure on this separator is 5000psi.  The theoretical minimum burst pressure is 15,000psi.  Each separator is hydro tested to 10,000psi.  This separator measures 12 inches tall and 2.5 inches in diameter.  It is made of 6061 aluminum and black anodized. Each separator has one input port and one output port on the top and one drain port on the bottom.  All ports are 1/4" NPT female.  Included with this separator is one stainless steel drain valve, one stainless steel condensate drip tube and one sintered stainless steel output filter.  The inlet and output ports are reversible.  There are two 1/4" x 20 threaded ports on the bottom for mounting, as seen in the third picture.  If you do not wish to bottom mount this separator, you may also use two 2.5" ID U-bolts and mount it to any vertical surface.  This separator will work well for any compressor up to about 15CFM or so.  If your compressor is bigger than that, you may want to run two of these in series for better moisture separation.

FREE SHIPPING on this item to anywhere in the United States.  No international shipping on this item.